- Description
Clear sleeve make it easy to detect splice before shrinkage
Easily use and avoid any damages to the optical fiber during installation
Airproof configuration keeping the splice point\s good resistance of humidity and temperature
Smooth deburred stainless steel reinforcing member ends decrease the risk of fiber damage during installation
Strength member is made from Full hard stainless steel of 304 grade and is ground at the edges before polishing to make it completely burr free to avoid rupturing during shrinking. 304 grade gives better corrosion resistance, even in coastal environment. Resistant to heat shocks, no cracking dripping or flowing
Easily use and avoid any damages to the optical fiber during installation
Airproof configuration keeping the splice point\s good resistance of humidity and temperature
Smooth deburred stainless steel reinforcing member ends decrease the risk of fiber damage during installation
Strength member is made from Full hard stainless steel of 304 grade and is ground at the edges before polishing to make it completely burr free to avoid rupturing during shrinking. 304 grade gives better corrosion resistance, even in coastal environment. Resistant to heat shocks, no cracking dripping or flowing
You May Like
-
-
￥ 175.77
-
-
￥ 595.22
-
-
￥ 598.44
-
-
￥ 50.34